• The appliance should only be operated when it is completely assembled.
• Place the appliance on a stable surface which is flat and dry.
• Set up the device so that it cannot be knocked over, and so that no one can trip
over it or its cable.
• Ensure the appliance is at least 50 cm from any objects such as furniture or walls.
• Maximum installation altitude: 2000 metres
• Never cover or block the vents to prevent overheating/damage to the appliance.
• A persistent relative ambient humidity of more than 60 %, especially in winter, can
enable the formation of biological organisms.
• The design of the appliance and the cold evaporation technology make it impos-
sible for water to leak directly from it in the form of droplets, vapour, mist or lime
deposits, providing you use it correctly.
• Only operate the appliance with original Venta accessories designed for the pur-
pose. Venta Luftwäscher GmbH does not accept any liability for damage caused
by the use of third-party accessories.
• If you do not use the appliance for several days or put it into storage for a longer
period, empty the water tray completely, clean it and dry thoroughly to prevent
odours or biological organisms from developing in standing water or water resi-
dues.
• Unplug the power supply unit from the power outlet when the appliance is not in
use.
• Ensure the area surrounding the appliance does not become damp or wet. If mois-
ture leaks out, switch to a lower setting. If it is not possible to switch to a lower
setting, use the appliance with interruptions. Make sure no absorbent material
such as carpets, curtains, net curtains or tablecloths get damp.
18
EN