Haier LT26K3 Manuel D'utilisation page 34

All manuals and user guides at all-guides.com
USB MODE
When connecting/removing the USB device
1. Press SOURCE on the remote control unit to select USB option.
2.Insert USB equipment into corresponding USB interface 2s after starting the system.
3. After entering the system menu, press
require USB files press "OK" button to confirm the selection and enter the file list relative to
the selection.
4. Press on the remote control unit to select the required file, press OK button
/
to enter the selected file.
5. To exit the streaming media playing system and watch a TV program, you must press
"BACK"button to return to the streaming media main menu at first(to protect equipment),
and then press SOURCE to select TV to return to the TV mode.
Notes:
1. Under source of US , when press button MENU screen goes black, except when B
images or movies are being played.
2.While playing the USB ,press "BACK"button repeatly , the screen picture will return
to USB main interface, and only at this time you can switch corresponding signal
sources by pressing "SOURCE" again.
3. Please do not unplug the USB device when the connected USB storage device is
working . When such device is suddenly separated or unplugged, the stored files
or the USB storage device may be damaged.
/ on the remote control unit to select the
,