Ezviz T6 Guide D'installation page 14

3
Recording Closed Status
Keep the door or window closed and then press and hold the button on T6
for 2s to record the closed status. The indicator flickers red for 15s
indicating the status is recorded.
The closed status requires recording again after the T6 being taken
off to recharge or adjust the installation position.
4
Completing Installation
The indicator blinks red when the door or window gets opened and send
the alarm message to the linked EZVIZ account.
The indicator blinks blue when the door or window gets closed.
Maintenance
When the battery runs out, a low battery warning will be sent to the EZVIZ
account to remind you to recharge. Slide the T6 to take it off from the base to
recharge and install it back after recharged.
Specifications
Charging Voltage
Battery Capacity
Battery Life
Working Temperature
Charging Humidity
Working Humidity
Trigger Angle
Power Consumption
All manuals and user guides at all-guides.com
5V
450mAh/1.66Wh
3 Months
-10°C to 55°C (14°F to 131°F)
0 to 40%
10% to 90%
>3°
≤10dBm
10