Hitachi CJ 110MVA Instructions page 16

English
CONNECTING WITH CLEANER
By connecting with cleaner (sold separately)
through dust collection adapter and adapter (sold
separately), most of dust can be collected.
(1) Remove the allen wrench from the base.
(2) Move the base fully forward. (Fig. 10, 11)
(3) Attach the chip cover.
(4) Connect the dust collection adapter with
adapter. (Fig. 18)
(5) Connect the adapter with the nose of cleaner.
(Fig. 18)
(6) Insert dust collection adapter into the rear hole
of the base until the hook catches in the notch.
(Fig. 19)
(7) Press the hook to remove the dust collection
adapter.
16
Chip
cover
Base
Dust collection
adapter
Fig. 18
Notch
Hook
Base
Rear
hole Dust
collection
adapter
Fig. 19
Adapter
Nose
Cleaner
Nose
Adapter