Télécharger Imprimer la page

SilverStone MS08 Mode D'emploi page 4

Publicité

MS08
Mobile Series
Product Overview
Introduction
ion
The SilverStone MS08 is a mobile rack designed to convert a standard 3.5" drive bay
one MS08 is a mobile rack designed to convert a standard 3
into two hot-swappable 2.5" drive bays. It has full SATA 6Gb/s speed and RAID 0,
swappable 2.5" drive bays. It has full SATA 6Gb/s speed
RAID 1, JBOD support to offer complete and flexible solution for users looking quickly
D support to offer complete and flexible solution for users loo
add 2.5" drives to their system.
Preface
When using this product for the first time, setting it to operate at any of the RAID
mode or perform "Initialize", "Partition", or "Format" actions on the hard drive will
result in original data on the hard drive to be lost.
This product is factory set to "RAID 1". If only one drive is installed, the original data
on the drive will not be affected. However, installing two drives will result in loss of
original data after initial setup.
powered for changes to take effect.
Specification
Model No.
Enclosure material
Color
Power requirement
HDD size support
HDD interface support
Minimum System
Requirements
Enclosure interface
RAID mode support
Net Weight
Dimension
1
All manuals and user guides at all-guides.com
To change RAID mode, the rack will need to be
SST-MS08B
Aluminum + Plastic
Black
5V via SATA 15pin power connector
2.5" SATA HDD / SSD
SATA I / II / III
Windows XP, Vista, 7, 8, 8.1 (32bit/64bit)
Mac OS 10.x
Linux
SATA 6Gb/s
RAID 0, RAID 1, JBOD
194g ±20g
146mm (D) x 102mm (W) x 25.4mm (H)

Publicité

loading