Troubleshooting - KLIPPO 1:08 Manuel D'utilisation

Problem
The engine will not start
The engine hums but does not start The power cable is too long and/or

TROUBLESHOOTING

Cause
The power cable is not connected
The engine overload protection has
tripped out
the cross-section area of the cable is
too small
Capacitor out of order
25
Action
Connect the power cable to the
electrical socket
Remove the reason for the overload
(e.g. too much grass, twigs, etc.)
and wait a few minutes before
attempting to restart
Change to a shorter power cable
or to a cable with a larger cross-
section
Take the machine to an authorised
Klippo service workshop to replace
the capacitor