HURAKAN HKN-SV15 Mode D'emploi page 14

EN
All manuals and user guides at all-guides.com
Important! keep an eye on the water level. Do not lower the device below the maximum level.
Do not place the device on a stove or in an oven. If the device falls into the water, disconnect it
from the mains immediately. Do not use the thermostat in direct contact with the products.
Each product must be placed in vacuum packaging before use.
Never use distilled water!
4. Connecting the power supply.
Connect the power supply and make sure the connection is secure.
5. Setting/adjusting parameters in degrees Celsius or Fahrenheit. To select and set the desired
temperature measuring scale (°C or °F), press and hold the mode switch button (6) for 3 sec-
onds.
6. Setting the temperature ("Set Temp"): set the required water temperature before starting
using the regulator (5). When the regulator is turned slowly, the temperature setting increment
is 0.1 degrees. When the regulator is turned quickly, the temperature setting increment is 3
degrees.
14