Philips 3000 Serie Mode D'emploi page 17

Replacement
Replacing the shaving heads
2yrs
2
1
9 Insert the hinge of the shaving unit into the slot in the
top of the shaver. Then close the shaving unit.
Note: If the shaving unit does not close smoothly,
check if you have inserted the shaving heads properly
and if the retaining frame is locked.
For maximum shaving performance, we advise you to
replace the shaving heads every two years. Replace
damaged shaving heads immediately. Always replace the
shaving heads with original Philips shaving heads (see
'Ordering accessories').
1 Switch off the appliance and make sure it is
disconnected from the wall socket.
2 Press the shaving unit release button to open the
shaving unit. Pull the shaving unit off the appliance.
3 Turn the lock anticlockwise (1) and remove the
retaining frame (2). Place it aside in a safe place.
4 Remove the shaving heads from the shaving unit.
Discard the used shaving heads immediately to avoid
mixing them with the new shaving heads.
17
English