Before Using Your Freezer - Zanussi ZUHE30FW1 Manuel D'utilisation

• Use the adjustable front legs to make sure your appliance is level and stable. You can
adjust the legs by turning them in either direction. This must be done before placing food
in the appliance.
• Install the two plastic distance guides (the parts on the black vanes -condenser- at the
rear) by turning it 90° (as shown in the figure) to prevent the condenser
from touching the wall.
• The distance between the appliance and back wall must be minimum
42mm and maximum 75mm.
• For Side by Side niche installation please refer to the Joining Kit provided
with the cabinet freezer and its installation manual (NOTE: joining kit is
also available separately as accessory).

Before using your freezer

• When using your freezer for the first time, or after transportation, keep it in an upright
position for at least 3 hours before plugging into the mains. This allows efficient operation
and prevents damage to the compressor.
• Your freezer may have a smell when it is operated for the first time. This is
normal and the smell will fade away when your freezer starts to cool.
Internal lighting
WARNING!
Risk of electric shock.
• Concerning the lamp(s) inside this product and spare part lamps sold separately: These
lamps are intended to withstand extreme physical conditions in household appliances,
such as temperature, vibration, humidity, or are intended to signal information about
the operational status of the appliance. They are not intended to be used in other
applications and are not suitable for household room illumination.
EN - 10 -