Hilti DD-WMS 100 Mode D'emploi page 20

All manuals and user guides at all-guides.com
faultless operation of the appliance, all parts must be fitted correctly and must meet the necessary
requirements.
▶ Have the appliance serviced by a qualified repair person using only genuine Hilti spare parts. The safety
of the appliance can thus be maintained.
▶ Always unplug the supply cord from the power outlet when the appliance is not in use (during breaks),
before cleaning and maintenance and before changing the filter or accessories. This preventive safety
measure reduces the risk of starting the appliance accidentally.
▶ Never pull the appliance by the supply cord to a new working position. Do not run the wheels of the
appliance over the supply cord.
▶ Do not transport the appliance by crane.
▶ Close the hose inlet socket with the cap before transporting the appliance and when it is not in use.
3 Description
3.1 Overview of the product
Toolbox retaining bar
@
Handlebar
;
Ratchet strap
=
Gripping areas
%
Water and waste material container
&
Hook for the ratchet strap
(
Suction hose inlet fitting
)
Water supply hose outlet fitting
+
"Water level too low" warning lamp
§
"Water level too high" warning lamp
/
"No filter" warning lamp
:
3.2 Intended use
The DD-WMS 100 electrically-powered water management system is designed for use with water-cooled
diamond coring machines.
Use the DD-WMS 100 to pick up and collect drilling slurry, to recycle the water and to supply water to
diamond core drilling machines.
This appliance is suitable for commercial use, e.g. in hotels, schools, hospitals, factories, shops, offices and
by rental companies.
The appliance can be operated in the following modes:
Recycling
•
Water supply to diamond core drilling machines plus simultaneous vacuum removal and filtering of drilling
slurry.
• Water supply mode
Water supply to diamond core drilling machines without vacuum removal.
Vacuum cleaner
•
Small cleaning jobs.
3.3 Items supplied
1 DD-WMS 100 water recycling system, 1 suction and water supply hose set with connectors, 1 filter bag
and 1 operating instructions.
You can find other system products approved for use with your product at your local Hilti Center or online
at: www.hilti.group.
3.4 Control switch
Status Meaning
Off
14 English
Printed: 12.06.2017 | Doc-Nr: PUB / 5306545 / 000 / 03
1
∙
$
£
|
¡
Q
W
E
R
T
"Water supply" mode
"Vacuum cleaner" mode
"Off" mode
"Recycling" mode
Power outlet on the appliance (optional)
Control switch
Grip
Top section
Catch
Supply cord hook