Publicité
Les langues disponibles
Les langues disponibles
• Position the round plastic spacer at each mounting hole location. To help hold the spacers in-place, position the
small diameter end of the spacer towards the TV/Monitor case. Lift and hold the TV/Monitor in position. Select a
7/8", 1 1/4", or 1 1/2" mounting screw (supplied) based on your particular installation and insert the first mounting
screw into one of the mounting holes in the TV/Monitor, and tighten.
• Insert the remaining 3 mounting screws (supplied) and tighten.
• Complete all the connections on the back of the TV/Monitor, if they were not made before attaching the TV/Monitor
to the cabinet.
Using #8 Machine Screws and Threaded Mounting Shafts
• From underneath the cabinet, position the mounting hole template and mark the mounting hole locations.
• From underneath the cabinet, drill a 3/16" hole at each of the marked mounting hole locations (do not drill complete
thru into the inside of the cabinet).
• Measure the distance between the frame of the cabinet and the bottom of the cabinet. Combine the supplied 1/4",
1/2" and 3/4" round plastic spacers so they will fill the space between the bottom of the cabinet and the frame of
the cabinet.
• Depending on the depth of the cabinet, decide if you need to make all the connections to the back of the
TV/Monitor before fastening the TV/Monitor to the bottom of the cabinet.
All manuals and user guides at all-guides.com
16
Publicité
