Publicité
Les langues disponibles
Les langues disponibles
• OR and OR/WH
• GR and GR/WH
• BL and BL/WH
• BR and BR/WH
3. Attach each of the twisted pair of wires to the corresponding Camera 2 screw terminals on the back of the
TV/Monitor. Tighten each screw securely.
Wiring and Mounting the TV/Monitor
Locate the TV/Monitor unit where the camera, TV, AM, FM and Telephone cables were previously ran. Depending on
the depth of the cabinet, decide if you need to make all the connections to the back of the TV/Monitor before fastening
the TV/Monitor to the bottom of the cabinet. The method and type of mounting hardware using to attaching the
TV/Monitor will very depending on your installation. Decide which mounting hardware to use based on the following
instructions.
Using #8 wood screws
• From underneath the cabinet, position the mounting hole template and mark the mounting hole locations.
• From underneath the cabinet, drill a 3/32" hole at each of the marked mounting hole locations (do not drill complete
thru into the inside of the cabinet).
• Measure the distance between the frame of the cabinet and the bottom of the cabinet. Combine the supplied 1/4",
1/2" and 3/4" round plastic spacers so they will fill the space between the bottom of the cabinet and the frame of
the cabinet.
• Depending on the depth of the cabinet, decide if you need to make all the connections to the back of the
TV/Monitor before fastening the TV/Monitor to the bottom of the cabinet.
All manuals and user guides at all-guides.com
15
Publicité
