Publicité
Les langues disponibles
Les langues disponibles
Operating Instructions
Current Source
1. Insert the black test lead banana plug into the negative (COM) jack
and the red test lead banana plug into the positive (mV-mA) jack.
2. Set the function switch to the "mA source" position.
3. Press the "0~19.9mA" button for a 0.01mA display resolution
(max display is 19.99mA); press the "0~24mA" button for a 0.1mA
display resolution.
4. Adjust the "CAL ADJUST" knob to match the current output display
value.
Current Measurement
1. Insert the black test lead banana plug into the negative (COM) jack
and the red test lead banana plug into the positive (mV-mA) jack.
2. Set the function switch to the "mA measure" position.
3. Press the "0~19.9mA" button for a 0.01mA display resolution
(max display is 19.99mA); press the "0~24mA" button for a 0.1mA
display resolution.
4. Remove power from the circuit under test, then open up the circuit
at the point where you wish to measure current.
5. Touch the black test probe tip to the negative side of the circuit,
and touch the red test probe tip to the positive side of the circuit.
Read the current value in the display.
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
1-877-849-2127 | info@reedinstruments.com
Black
www.reedinstruments.com
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
All manuals and user guides at all-guides.com
reedinstruments
www
Only if you REALLY need them:
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Rich Black -
20/20/20/100
5
com
Publicité
