Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
5. OPERATION
PUSH BUTTONS
•
Power switch: Long press this push push button to turn the scooter on or off.
•
Throttle: Use it to start the scooter up and to accelerate.
•
Brake: Hold it pressed to stop. Gently step on the rear fender to assist the braking process.
•
Function: Press this push button to adjust speed. Select between:
o
ECO mode: No icon is shown on the display.
o
COMFORT mode: The displays shows a white "D".
o
SPORT mode: The display shows a red "D".
•
Headlight: Short press the function push button twice to turn the headlight on. The back
lights are always on. While the lights are on, short press the function push button twice
to turn them off.
•
Cruise mode: Ride at steady speed for 6 seconds to enter this mode. To deactivate it,
press the throttle or brake.
Note: This mode is not activated in the default configuration.
Note: The back light will blink when using the brakes.
HOW TO RIDE THE SCOOTER
1_Press the power push button for 2 seconds.
46
3_Place both feet on the footrest.
4_Press the throttle push button with your right
hand and rotate the handle towards your body.
5_ Press the throttle push button to speed up.
WARNING: Do not ride too fast.
6_Press the brake to stop or decrease speed.
Press the rear fender with the foot to assist the
braking process.
7_Only get off the scooter when riding at very
low speed or when it is stopped.
ENGLISH
47
Publicité
