Use of any other hose and regulator assembly could be
dangerous, and may not provide adequate gas supply to the
Summit
Built-In Gas Grill, and could result in a fire or an
®
explosion causing serious bodily injury or death and damage to
property.
Failure to build an LP cylinder enclosure for a 20 lb cylinder
following the requirements for ventilation, cylinder retention
and separation of the LP cylinder from a heat source, listed in
the ANSI Standard for Outdoor Cooking Gas Appliances, ANSI
Z21.58 CSA 1.6, could be dangerous, and could result in a fire or
an explosion causing serious bodily injury or death and damage
to property.
If you do not follow the DANGER statements exactly, the Warranty on the Summit
Built-In Gas Grill will be voided.
◆
POSITIONING YOUR LP TANK ENCLOSURE
When determining a suitable location for your LP tank enclosure, give thought to concerns
such as proximity to traffic paths and keeping any gas supply lines as short as possible.
Never install the Summit
LP tank enclosure in a garage, breezeway, or shed, under an
®
unprotected overhang, or in any other enclosed area. Position the LP tank enclosure and
structure so there is enough room to safely evacuate the area in case of a fire.
CLEARANCE FROM COMBUSTIBLE SURFACES OR STRUCTURES
m WARNING: The structure, "island" counter tops and adjacent
work areas for the LP tank enclosure must be built from
noncombustible materials only.
NOTE: If you have questions on what materials are considered noncombustible, contact you
local building supplier or fire department.
30
BUILT-IN TANK ENCLOSURE INSTRUCTIONS
m DANGER
m DANGER
◆
CLEARANCES - INSTALLATION ADJACENT TO A STRUCTURE
b
1
®
1
a
b
c
◆
CLEARANCES - "ISLAND" INSTALLATION
b
1
1
2
a
b
c
c
1
1
a
24" (610 mm) any surface
LP tank enclosure
Any surface
Non-combustible surface
c
2
1
a
24" (610 mm) any surface
10
⁄
" (267 mm) minimum
1
2
LP tank enclosure
Any surface
Non-combustible surface
b
b