Publicité
ASSEMBLY INSTRUCTIONS
II
x4
FIG. 1
Loosely
1)
attach each Left and Right Leg (Bc & Ac) to the Seat Assembly (Hc)
with Hex Bolts (II).
KK
x2
FIG. 2
2) Attach the Right and Left Back Supports (Cc & Dc) to the Seat Assembly (Hc)
with one Wood Screw (KK) through the upper holes. The longer edge of the back
supports must be towards the front of the chair.
KK
x8
3) Attach the Back Assembly (Gc) to the Seat Assembly. The angled edges of the
back supports must be under the upper brace on the back before screwing in
place. Use Wood Screws (KK) to attach upper back brace into the top edge of
the Back Supports (Cc & Dc) and the lower back brace to attach to the Seat
Assembly (Hc).
968KFSIc Fan Back Settee
Hc
Bc
II
Dc
KK
Hc
Gc
KK
KK
FIG. 3
Ac
Cc
KK
II
JJ
FRONT
KK
II
968KFSIc – Page 3
Publicité
