Publicité
Les langues disponibles
Les langues disponibles
Before using your new Armor All™ orbital polisher, read and familiarize yourself with the safety rules listed in this
manual and with the features below.
Cord:
12" Power cord
Base Pad:
10" Water-resistant
On/Off Switch:
Slide toggle on/off switch
Vent Openings:
Do not block or expose to water
Terrycloth Applicator Bonnet: For applying wax or polish. Washable and re-usable.
Soft Buffing Bonnet:
POWER CORD
(NOT PICTURED)
VARIABLE SPEED
DIAL
WATER-RESISTANT FOAM
BUFFING WHEEL
WARNING: Do not allow familiarity with your orbital polisher to make you careless. Remember that a
careless fraction of a second is sufficient to inflict severe injury.
WARNING: Your orbital polisher is designed for and should only be connected to an AC power supply
that is 120 volts, 60 Hz (normal household current). Do not operate this tool on direct current (DC). A
substantial voltage drop will cause a loss of power and the motor will overheat. If your orbital polisher does
not operate when plugged into an outlet, double check the power supply.
GETTING TO KNOW YOUR
ORBITAL POLISHER
For removing wax or polish and buffing. Reusable.
TERRYCLOTH APPLICATOR
Wheel-Style Handle:
Variable Speed Dial:
WOLLEN BUFFING BONNET
BONNET
9
For optimum stability
Dial up or down for added
control when needed
VENT OPENINGS
WHEEL-STYLE
HANDLE
ON/OFF SWITCH
MOTOR HOUSING
Publicité
