Publicité
Les langues disponibles
Les langues disponibles
operating the side-by-side
refrigerator
refrigerator
CHANGING THE INTERIOR LIGHTS
Pull the power plug out of the socket before changing the interior light of the refrigerator.
- Otherwise, there is a risk of electric shock.
If you experience difficulty when changing the light, contact your service center.
Changing the LED Type Lighting
Do not disassemble or replace the LED type Lighting.
To change the LED Type Lighting contact service center or your authorised dealer.
CHANGING THE WATER FILT
The "Filter Indicator" light lets you know when it is time to change your water filter cartridge. To give you
some time to get a new filter, the light will come on up just before the capacity of the current filter runs out.
Changing the filter on time provides you with the freshest, cleanest water from your fridge.
1. Remove the water filter from the box and put a month indicator sticker on the filter as shown.
2. Place a sticker on the filter that dates six months in the future. For example, if you are replacing
the water filter in March, put the "SEP" (September) sticker on the filter to remind you to replace
in September. Normally filter life is about every 6 months.
3. Next, remove the fixed cap by turning it counter clockwise.
4. Remove the new filter's protective cap and remove the old filter.
5. Position and insert the new filter into the filter housing.
Slowly turn the water filter clockwise 90º to align with the indication mark on the cover, locking
the filter in position. Make sure that the indicator is lined up with the "lock" position. Do not over
tighten.
(month indicator)
38_
operating
L L ER
4
Cover filter
Align the indication
mark with lock
position
5
Publicité
