Publicité
Les langues disponibles
Les langues disponibles
Clean the parts regularly to prevent the accumulation of dirt and lime-scale.
For daily cleaning, use a neutral cleaner.
Acids are necessary ingredients of cleaning materials for removing lime.
However, please pay attention to the following points when cleaning
fittings:
Only use cleaning materials which
are explicitly recommended for this
type of application.
Never use cleaning materials
which contain hydrochloric, formic
or acetic acid, as they may cause
considerable damage.
Do not use phosphoric acid as it
can also cause damage.
Never use cleaning materials or
appliances with an abrasive effect,
such as cleaning powders, sponges
or microfiber cloths.
Please follow the cleaning material
manufacturer's instructions.
When using spray cleaners, spray
first onto a soft cloth or sponge.
Never spray directly onto the
fittings, as drops could enter
openings and gaps, which can then
cause damage.
After cleaning, rinse thoroughly
with clean water to remove any
cleaner residue.
Components with damaged
surfaces must be exchanged,
otherwise this can cause an injury.
Damage caused by improper
treatment will not be covered by
our warranty.
CARE AND CLEANING
6
2
Publicité
