Safety Warning; Warnings For The Installer - Palazzetti NICOLE Manuel D'installation, D'utilisation Et De Maintenance

2

SAFETY WARNING

2.1 WARNINGS FOR THE INSTALLER

Observe the prescriptions contained in this
manual.
The instructions for assembly and
disassembly of the appliance are
reserved for specialist technicians
only.
The installation, use and maintenance of
the product must be in accordance with the
manufacturer's instructions and in compliance
with the regulations. Failure to comply with
the instructions and any incorrect operations
may give rise to hazardous situations, damage
to property, animals, health problems or
malfunctioning.
The installation and maintenance of the prod-
uct must be carried out exclusively by quali-
fied personnel with suitable knowledge of the
product itself. Use only original spare parts
recommended by the manufacturer.
Responsibility for the works carried out in the
location of the appliance is, and remains, with
the user; the latter is also responsible for car-
rying out the checks relating to the proposed
installation solutions.
The installer must comply with all local, na-
tional and European safety regulations.
The appliance must be installed on floors with
adequate load bearing capacity.
Check that the chimney flue and air
inlet set-ups conform to the type of
installation.
004778750 - 07/05/2021
Before starting the assembly or disassembly
phases of the appliance, the installer must
observe the safety precautions required by law
and the following indications in particular:
• do not operate in adverse conditions;
• they must operate in perfect psychophysical
conditions and must check that the personal
protective equipment is intact and function-
ing perfectly;
• they must wear gloves and safety shoes;
• they must use tools with electrical insulation;
• they must make sure that the area used
during assembly/dismantling is free from
obstacles.
The product must only be installed in rooms
that are not at risk of fire and equipped with
all the necessary services including air and
electrical supplies and flue gas exhausts.
Evaluate the static conditions of the surface
bearing the weight of the product and provide
suitable insulation if it is composed of flamma-
ble materials (e.g. wood, carpet, plastic).
19