deville C077AH-A Notice D'installation Et D'utilisation page 12

You are advised to have a thorough and
careful reading of the instructions for use in
order to get the best use and satisfaction of
your DEVILLE appliance.
The fact of not respecting the fixing, the
installing and the use istructions involves the
responsibility of the person who doesn't
respect them.
THIS STOVE MUST BE INSTALLED IN
ACCORDANCE TO THE CURRENT D.T.U.
SPECIFICATIONS.
The stove must be installed by a skilled
professional.
All the local and national regulations as well
as the European standards have to be
respected when the stove is used.
The appliance mustn't be modified.
1 - DESIGNATION
Your DEVILLE appliance complies with the essential
requirements of the 305/2011 (EU) Construction
Products directive according to appendix ZA of the EN
13240 standard.
It is a continuous combustion heat appliance using a
grate that operates exclusively using wood, with a half-
closed combustion chamber.
Note down the serial number written on the descriptive
plate stuck on the appliance and on the certificate of
guarantee, write it down in the following box :
Serial number
This number will be necessary to identify your appliance
when spare parts will be needed.
2 – CALORIFIC NOMINAL POWER
Nominal Draught
power
C077AA-B 9 kW
C077AH-A 9 kW
Rated calorific power
standard NF EN 13240 during a test under normal
and intermittent operating conditions.
Rated calorific power:
• Obtained under a draught of 12 Pa, with a load of
2,05 kg of hard wood (hornbeam, oak, and so on) in
the form of a wooden log of about 8-11 cm in
diameter, length 48-54 cm.
Smoke output Smoke
/ weight temperatures
12 Pa 6,36 g/s
12 Pa 6,36 g/s
obtained according
• Reload every 45 mn on a 0.5 kg bed of embers with
the air ventilation pull handle opened to its maximum
and the nozzle flap to the closed position.
• The announced power is the average power
obtained with each 45 minute-load.
3 - DESCRIPTION AND DIMENSIONS
3.1 - Description
C077AA-B : Fig. 1a
C077AH-A : Fig. 1b
The main elements constituting the stove are indicated
below :
(1) Handle
(2) Loading door
(3) Protection shield
(4) Top
(5) Tube
(6) Panel or decoration
(7) Air adjustment knob
(8) Nozzle flap control
A secondary air intake is incorporated into the upper
part of the door window in order to keep it clean and to
ensure better combustion of the wood.
The air damper, situated at the bottom of the door
allows to choose a fire speed.
Net weight of
the appliance
3.2 - Dimensions
C077AA-B : Fig. 2a
C077AH-A : Fig. 2b
3.3 - Installation of the C077AH-A floor
protector (Fig. 13)
With the appliance is in its final position, you must:
• Lift it by the cast-iron top panel (A).
298,4 °C
• Position the floor protector to your liking.
298,4 °C
Lower the appliance (B).
•
to
4 – INSTALLATION REQUIREMENTS FOR
THE APPLIANCE
The installation cannot be modified by the user.
We remind you hereafter of the prior recommendations
to be respected, these will have to be added to the strict
application of the whole DTU 24-2-2.
4.1 – Definition of components included in the
smoke evacuation system(Fig. 3)
4.2 – Characteristics and size of the smoke
flue to which the appliance must be
connected
12
C077AA-B C077AH-A
84 kg 94 kg