Glacier bay HD873X-0701 Guide D'installation Et D'entretien page 13

Installation (continued)
10
Adjusting the temperature
D
Reinstalling the inverter and
sleeve
NOTE: Rotate the cartridge stem (1) clockwise to turn off
the water before you install the handle.
□
Place the inverter (2) onto the valve body (D)
and rotate the inverter (2) with notch facing
down. Then secure with the screw (3).
□
Screw the sleeve (4) onto the valve body (D).
11
Installing the escutcheon
and handle
□
Install the escutcheon (E) onto the valve body
(D) using the escutcheon screws (M).
□
Place the handle (F) onto the valve body (D) and
tighten the set screw (G) with the Hex wrench
(Hex: 2.5 mm, H) provided.
M
F
G
H
2
3
4
E
13
Please contact 1-855-HD-GLACIER for further assistance.
D
1
D
HOMEDEPOT.COM