Do not use flammable liquids during the ignition (alcool, petrol, oil, etc...).
10.3
CONTROL PANEL
PANEL ELEMENT
NICE - MIRIAM - CRISTAL - LEONORA - PRETTY - DIANA - KRISS - MARY
All manuals and user guides at all-guides.com
DESCRIPTION
P1 and P2: when in set temperature mode, they are useful to increase or decrease
the thermostat value from min. 6°C to max 40°C. Keeping pressed P2 key it is
possible to see the fume temperature at the exhaust. Both have programming
functions.
P3: it enables to enter set temperature and User and Technician parameters
menu.
P4: switching on and off, alarm reset and exit from programming.
P5 and P6: increase and decrease the calorific power from 1 to 5.
Chrono: active time programming.
Ignition plug: active ignition.
Auger: active.
Fume fan: active.
Exchanger fan: active.
-
Alarm: active.
EN
65