Adjusting The Listening Position; Using Rear Speakers As Subwoofer - Rear Bass Enhancer; Adjusting Setup Items - Sony CDX-GT44U Mode D'emploi

5
Rotate the control dial to select the
subwoofer position from "NEAR,"
"NORMAL" or "FAR," then press it.
6
Press
To cancel listening position, select "OFF"
on step 3.
Adjusting the listening
position
You can fine-tune the listening position
setting.
1
During reception/playback, press the
select button.
2
Rotate the control dial until "ADJ
POSITION" appears, then press it.
3
Rotate the control dial to adjust the
listening position, then press it.
Adjustable range: "+3" – "CENTER" –
"–3."
4
Press
DM+ Advanced
DM+ Advanced improves digitally
compressed sound by restoring high
frequencies lost in the compression process.
1
During playback, press the select
button.
2
Rotate the control dial until "DM+"
appears, then press it.
3
Rotate the control dial to select "ON,"
then press it.
4
Press
Tip
The DM+ setting can be memorized for each
source.
16
(BACK).
(BACK).
(BACK).
Using rear speakers as
subwoofer — Rear Bass
Enhancer
Rear Bass Enhancer enhances the bass
sound by applying the low pass filter setting
(page 17) to the rear speakers. This function
allows the rear speakers to work as a
subwoofer if one is not connected.
1
During reception/playback, press the
select button.
2
Rotate the control dial until "RB ENH"
appears, then press it.
3
Rotate the control dial to select from
"1," "2" or "3," then press it.
4
Press (BACK).

Adjusting setup items

1
Press and hold the select button.
The setup display appears.
2
Rotate the control dial until the desired
item appears, then press it.
3
Rotate the control dial to select the
setting, then press it.*
The setting is complete.
4
Press (BACK).
* For CLOCK-ADJ and BTM settings, step 4 is
not necessary.
The following items can be set depending
on the source and setting:
CLOCK-ADJ (Clock Adjust) (page 5)
CT (Clock Time)
Activates the CT function: "ON," "OFF"
(page 10).