Greenlee HB10 Dynapress Manuel D'instructions page 5

IMPORTANT SAFETY INFORMATION
Inspect unit before operating. Replace any worn,
damaged or missing components with Greenlee
Utility replacement parts. A damaged or improperly
assembled component can fail and strike nearby
personnel.
Failure to observe this precaution can result in
severe injury or death.
Use this tool for manufacturer's intended purpose
only. Use other than that which is described in this
manual can result in injury or property damage.
Failure to observe this precaution can result in injury
or property damage.
Hydraulic oil can cause skin irritation.
• Handle the booster and hoses with care to prevent
skin contact with hydraulic oil.
• In case of accidental skin contact with hydraulic
oil, wash the affected area immediately to remove
the oil.
Failure to observe these precautions can result in
injury.
Greenlee / A Textron Company
All manuals and user guides at all-guides.com
HB10 Dynapress
5
Emergency stop procedure:
1. Move the remote control valve's lever to the
neutral position.
2. Move the flow lever on the hydraulic power
source to the OFF position.
Procedure for disconnecting hydraulic hoses, fittings
or components:
1. Move the flow lever on the hydraulic power
source to the OFF position.
2. Stop the power source.
3. Follow the sequence under Disconnecting
Hoses to prevent pressure buildup. In case
some pressure has built up, loosen hoses, fit-
tings or components slowly.
Note: Keep decals clean and legible. Replace
decals when necessary—see the decals listed in the
Specifications and Parts manual.
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Hydraulic Booster
®