Maintenance Instruction - COFAN 0900 0710 Guide D'utilisation

7. Explanations of warning Signs Used For This Tool.
The operator's
instruction must be read
before work starts
8. Application.
Rotary power tool intended for chamfering deburring, and light cleaning operations and fitted with
inserted tools mounted in collet chucks.
9. The weight of this tool is about : 0.55~0.95 kg.
Note : If the weight of this tool exceeds 15kg, the following attention shall be paid to :
(1) Be sure that you can afford the weight.
(2) Be sure to wear foot protection, to prevent the risk of impact due to the drop of tool.

3. Maintenance Instruction

1. Lubrication
Proper lubrication is the owner's responsibility. Failure to lubricate the air tool properly will dramati-
cally shorten the lire of the tool and will void the warranty
This die grinder requires lubrication before the initial use and before and after each additio-
nal use.
2. Die grinder requires lubrication throughout the life of the tool and must be lubricated in two
separate areas : the air motor and the impacting mechanism. Follow the outlined procedures
3. Air Motor Lubrication.
The motor must be lubricated daily. An air motor cannot be oiled too often
Hearing protection
must be worn
ENGLISH
Eye protection must
be used or safety glasses
worn
16
Direction of rotation,
reverse function