ANSMANN AES3.2 Mode D'emploi page 13

Press for approx. 3 seconds the red operating button to
3.
activate the PC Energy Saving Mains Socket. The power
supply is now established for one minute.
Please ensure that all connected devices are on standby.
4.
If necessary put the devices on standby manually. When
connecting battery operated devices (e.g. Notebook, Net-
book), the battery has to be fully charged.
Press the green "learn standby" button for 3 seconds.
5.
The PC Energy Saving Mains Socket will then learn auto-
matically the standby characteristics of the connected
devices. This sequence of learning will be indicated by a
fast blinking (approx. 2 times per second) of the red ope-
rating button. When the learning process is finished the
PC Energy Saving Mains Socket automatically switches
into disconnecting mode. This mode will be indicated by
slow blinking (approx. 1 time per second) of the operating
button. The connected devices will be cut-off from mains
power after one minute in disconnecting mode. Thanks
to intelligent Zero Watt Technology the PC Energy Saving
Mains Socket disconnects itself from the mains and does