Publicité
Les langues disponibles
Les langues disponibles
7
Installing your new appliance
Before using the appliance for the first time,
you should be informed of the following tips.
Warning!
For proper installation, this refrigerator
must be placed on a level surface of hard
material that is the same height as the rest
of the flooring. This surface should be
strong enough to support a fully loaded
refrigerator.
The rollers, which are not castors, should
be only used for forward or backward
movement.
Moving
sideways may damage your floor and the
rollers.
Ventilation of appliance
In order to improve efficiency of
the cooling system and save
energy,
it
maintain good ventilation around the
appliance for the dissipation of heat. For
this reason, sufficient clear space should
be available around the refrigerator.
Suggest: It is advisable for there to be
50-75mm of space from the back to the
wall, at least 100mm from its top, at least
100mm from its side to the wall and a
clear space in front to allow the doors to
open 130°. As shown in follow diagrams.
the
refrigerator
is
necessary
to
Note:
This appliance performs well within the
climate class from SN to T showed in the
table below. It may not work properly if
being left at a temperature above or below
the indicated range for a long period.
Climate class
Ambient temperature
SN
N
ST
T
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
Publicité
