AKASO Brave 4 Mode D'emploi page 5

PHOTO MODE
Press Mode button once to switch to Photo Mode after you turn on camera.
In Photo Mode, press Shutter button, the camera takes a photo. Press Up or Down button
to adjust the zoom level.
EV
0.0
A
ISO
AUTO
PLAYBACK MODE
Press Mode button several times to switch to Playback Mode.
In Playback Mode, press the Up/ Down button to scroll through video or photo files.
EV
0.0
A
05
All manuals and user guides at all-guides.com
00000
20M
N
Mode
CAMERA SETTING MODE
Press Mode button several times to switch to Camera Setting Mode. You can change
camera settings in this mode.
Note: Camera does not record sound when it is in the waterproof case.
Resolution
SIZE
Looprecording
Gyroscope
WDR WDR
CUSTOMIZING YOUR BRAVE 4
1. Resolution: 4K / 24FPS, 2K / 30FPS, 1080P / 60FPS, 1080P / 30FPS, 720P / 120FPS,
720P / 60FPS, 720P / 30FPS
Default setting is 1080P 60FPS.
Note: When capturing video at high resolutions or high frame rates in warm ambient
temperatures, the camera may become warm and use more power.
2. 2. Loop recording: Off / 3 Minutes / 5 Minutes / 10 Minutes
Default setting is 3 minutes.
Using Loop Recording, you can continuously record video, but save only the moments that
you want. For example, if you select a 5-minute interval, only the previous 5 minutes are
saved when you press the Shutter button to stop recording. If you record for 5 minutes and
do not press the Shutter button to stop recording and save, the camera records a new
5-minute interval by recording over your previous 5 minutes of footage. When the micro SD
card is full, the new files will cover the old one if loop recording is on.
Setup
1/9
06