Panasonic ES-LV6N Mode D'emploi page 13

4
Dry the outer foil section, the
shaver, and the trimmer
completely.
• Allow the shaver to dry in the
shade, avoid direct sunlight.
Notes
• Be careful not to hit the main body on the sink or any other object
while draining the water. Failure to do so may cause malfunction.
• Do not wipe with thinners, benzine, alcohol etc.
Doing so may cause malfunction, or cracking or discoloration of
the parts.
Wipe with diluted soapy water.
• Do not use any kitchen or bathroom detergents other than hand
soap.
Doing so may cause malfunction.
Replacing the system outer foil and the inner blades
appears on the lamp display once a year. (Based on one
3‑minute shave use per day)
We recommend checking the system outer foil and the inner
blades when it appears.
Press the power switch for more than 30 seconds to turn off
Even if is not turned off right after the replacement, it will
automatically turn off within approximately 7 uses.
system outer foil once every year
inner blades once every two years
All manuals and user guides at all-guides.com
►Removing the outer foil section
Press the foil frame release buttons and lift the
outer foil section upwards.
►Attaching the outer foil section
After turning the foil frame mark (
securely attach the outer foil section to the shaver
until it clicks.
►Replacing the system outer foil
1. Press the system outer foil release buttons and
2. Align the foil frame mark (
.
►Replacing the inner blades
1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.
Note
Do not throw away the foil frame.
pull down the system outer foil.
) and the system
outer foil mark ( ) and securely attach
together until it clicks.
• Do not press the system outer foil release
buttons with excessive force.
Doing so may bend the system outer foil, preventing complete
attachment to the foil frame.
) to the front,
13