Publicité
Les langues disponibles
Les langues disponibles
6. The answering system automatically advances to the second number and announces
"Security Code (current 3 number). To set security code, press NEXT( 8 ), then press
ENTER to continue." To change the second and third numbers, repeat steps 4 and 5. After
the third number is stored, the answering system announces all the stored settings and
exits the setup menu.
NOTE: User can exit the setup menu at any time by pressing the STOP
button.
Reviewing the Settings
This function allows you to review the current time, rings to answer, message time and security
code.
• Press and release the SETUP/ENTER button to start the review. The answering
system announces the current settings.
Adjusting the Volume
Use the VOLUME + and - buttons to increase or decrease the volume. The answering
system beeps when it is not announcing a setting or playing a message.
Message Counter
The message counter displays the number of messages you have received.If the answering
system is off, the message counter displays a dash (-). If the answering system is on, the
message counter displays the number of messages.
Less Than 10 Messages
When you have new messages, the message counter continuously flashes the number of new
(from 1 to 9), unheard messages in the display.
When you have no new messages, the message counter displays the number of old messages
(from 0 to 9).
When you have both new and old messages, the message counter continuously flashes the
total number of messages (from 1 to 9) in the display.
More Than 10 Messages
When you have both old and new messages, the message counter continuously flashes the
total number of messages followed by a dash, such as 2, 8, -.
1
Publicité
