Gaggia Brera 037RG Mode D'emploi page 39

22 Hold the "
6 seconds to reset the machine and
cancel the descaling alarm signal.
Steady on
Reassemble the external part of the
Pannarello.
If the machine is switched o
during the descaling cycle,
next time the machine is switched
on the cycle must be repeated from
the beginning.
The descaling solution must
be disposed of according
to the manufacturer's instructions
and/or regulations in force in the
country of use.
After completing the des-
caling cycle, wash the brew
group as described in the "Brew
Group" section in the "Cleaning and
maintenance" section.
" button pressed for
Remarks on Descaling
The previous section explains the correct
operations to perform to descale the
machine.
The machine you have purchased is
equipped with advanced software to
check the quantity of used water in order
to provide reliable information about the
right time to carry out descaling opera-
tions.
This software has been programmed for
standard water hardness.
In case of especially hard water (high
calcium content), descaling cycles might
have to be carried out more frequently,
even if the machine does not display
warning signals.
Even if the machine is not used often (e.g.
1 coffee per day), it is recommended to
perform descaling cycles more frequently.
In these specific cases, it is recommended
to perform descaling cycles every 1-2
months, even if the machine does not
signal it.
• 39 •