Publicité
Les langues disponibles
Les langues disponibles
7. Attach the protection guards (9) to
the upper frame by inserting the
hooks at the top of the guards into
the holes on the supports. Repeat at
the bottom of the supports. Secure
the protection guards to the top of
the supports with the fixing brackets
(11) and screw in place.
9. Screw the handle (14) on the
front panel (13) - attach the
panel by inserting its two hooks
into the holes on the bottom
plate. Hook the chain (15) to the
hole in the control box,then
close the panel to the middle
plate - the panel is attached
by the magnets. Tips: the chain
can hole the panel while operat-
ing the control.
11
14
13
25
8. Fix the sides panels (12) with the
screws (18). Note: Do not cover the side
where the control knob is.
Publicité
