Hofmann monty 1575 Notice D'utilisation page 12

monty 1575
USA - CANADA
BEFORE PERFORMING ANY MAINTENANCE OR
REPAIRS THE MACHINE MUST BE DISCONNECTED
FROM THE AIR AND ELECTRICAL SUPPLY.
NEVER WEAR TIES, CHAINS OR OTHER LOOSE
ARTICLES WHEN USING, MAINTAINING OR
REPAIRING THE MACHINE. LONG HAIR IS ALSO
DANGEROUS AND SHOULD BE KEPT UNDER A HAT.
THE USER MUST WEAR PROPER SAFETY ATTIRE
I.E.: GLOVES, SAFETY SHOES AND GLASSES.
MAINTAIN ALL ELECTRIC CABLES IN GOOD
REPAIR.
KEEP WORKING AREA TIDY. CLUTTERED AREAS
INVITE ACCIDENTS.
AVOID DANGEROUS ENVIRONMENTS. DON'T USE
PNEUMATIC OR ELECTRICAL EQUIPMENT IN DAMP
OR WET LOCATIONS, OR EXPOSE THEM TO RAIN.
KEEP THE WORK AREA WELL LIGHTED.
ALL ELECTRICAL CONNECTIONS MUST BE
PERFORMED BY A LICENSED TECHNICIAN.
ALL SERVICE MUST BE PERFORMED BY AN
AUTHORIZED SERVICE TECHNICIAN.
SAFETY DEVICES
This machine has several protectors made of plastic to
prevent compression or crushing hazards.
The rotation speed of the turntable has been limited to
a maximum of 7 rpm to prevent dragging or entrapping
hazards.
There is an inflation pressure limiting device to prevent
explosion hazard due to tIre overinflation.
KEEP SAFETY DEVICES IN PLACE AND IN
WORKING ORDER.
12 Operator's Manual