Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
Electrical connection
Mounting the cooker hood
EN 12
This appliance is manufactured in class I, it must therefore be
connected to the earth system.
Make sure the supply voltage ratings correspond with those stated on
the appliance data plate. The connection to the mains is carried out as
follows:
BROWN = phase L
BLUE = phase N
YELLOW/GREEN = Earth
During the electrical connection make sure that the electrical socket is
equipped with earth connection.
This telescopic cooker hood has been provided with a power plug.
When installing the hood, make sure that this plug remains accessible.
Attention:
If you want to make a fixed connection, ensure that a multi-pole switch
with a distance between contacts of 3 mm is installed in the supply
cable.
The last pages of this manual show the steps for mounting the
cooker hood.
max. 100 cm
Publicité
