Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT SAFETY INFORMATION
The valve may be hot during and
after operation. Use care not to
touch the body of the valve. Hot
surfaces can cause serious burns.
Hydraulic oil can cause skin irritation.
• Handle the tool and hoses with care to prevent
skin contact with hydraulic oil.
• In case of accidental skin contact with hydraulic
oil, wash the affected area immediately to remove
the oil.
Failure to observe these precautions can result in
injury.
Greenlee Tools, Inc.
All manuals and user guides at all-guides.com
• Inspect the valve every operating day. Repair or
• Use this tool for manufacturer's intended purpose
Procedure for connecting or disconnecting hydraulic
hoses, fittings or components:
1. Move the flow lever on the power source to the
2. Stop the hydraulic power source.
3. Follow the sequence under Hose Connections to
Notes:
(1) Keep decals clean and legible. Replace when
(2) When disposing of any components (hydraulic
4
HFC30 Flow Control Valve
replace if leakage, cracking, wear or damage is
evident. A damaged valve can fail, resulting in
injury or property damage.
only. Use other than that which is described in this
manual can result in injury or property damage.
OFF position.
prevent pressure buildup. In case some pressure
has built up, loosen hoses, fittings or compo-
nents slowly.
necessary.
hoses, hydraulic fluid, worn parts, etc.), do so in
accordance with federal, state and local laws or
ordinances.
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Publicité
