Publicité
FEATURES AND CONTROLS
A
B
SNOWTHROWER CONTROLS
A. Speed Select Lever — Allows the operator to select forward
and reverse speeds (see Figure 2). To shift, move speed se-
lect lever to desired position.
NOTICE: Do not move speed select lever while Traction
Control is engaged. This may result in severe
damage to drive system.
B. Auger Control Lever — Used to engage and disengage the
auger and impeller. To engage, push down. To disengage, rel
ease.
C. Traction Control Lever — Used to propel snowthrower for-
ward or reverse. Push down to engage, release to disengage.
See also, "Free-Hand Control".
E
D
H
C
F
G
J
D. Deflector Control Lever — Used to control the angle of the
chute deflector (up or down).
E. Chute Rotation Crank — Used to rotate the discharge chute
to the left or right.
TM
F. Easy-Turn
Traction Control — When engaged, allows the
operator to release one drive wheel, but allows the other
wheel to continue driving for easy turning.
G. Free-Hand
TM
Control — After engaging the traction control
(left hand) and auger control (right hand), allows the operator
to release the auger control lever to use the other controls.
10
2
2
1
1
1
2
I
Figure 2
Publicité
