Publicité
Les langues disponibles
Les langues disponibles
en-CA - Warning and Safety instructions
Temporary or permanent operation on an autonomous
power supply system or a power supply system that is not
synchronized with the grid power supply (e.g., island
networks, back-up systems) is possible. A prerequisite for
operation is that the power supply system complies with
the specifications of EN 50160 or an equivalent local
standard.
The function and operation of the protective measures
provided in the domestic electrical installation and in this
Miele product must also be maintained in isolated
operation or in operation that is not synchronized with the
grid power supply, or these measures must be replaced by
equivalent measures in the installation. As described, for
example, in the current version of VDE-AR-E 2510-2 or an
equivalent local standard.
Charge and use the battery at an ambient temperature
between 32°F and 113°F (0°C and 45°C).
Using the battery outside of this ambient temperature
range will limit its performance.
Stop using the AP01 / AP02 / AP03 battery immediately
if you notice an unusual smell from it, if liquid is leaking
from it, if it is significantly overheating, or if it is discolored
or deformed. Dispose of the AP01 / AP02 / AP03 battery
immediately (see safety notice "Disposing of the AP01 /
AP02 / AP03 battery" at the end of this chapter as well as
"Caring for the environment – Disposing of old batteries").
48
Publicité
