Publicité
Les langues disponibles
Les langues disponibles
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
The flywheel-side radial seal carrier together with radial seal ring and the speed sensor is one unit. If
the radial seal ring is defective, the entire unit must be renewed. This tool is used to mount the
flywheel-side radial seal ring carrier (crankshaft radial seal ring) and it is to be used as OEM T50010.
The tool is suitable for VW Crafter, year 2006-2013 with following engines:
2.5L TDI, engine codes: BJJ, BJK, BJL, BJM
2.5L Blue TDI, engine codes: CEBA, CEBB, CECA, CECB,
SAFETY INFORMATIONS
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working with the engine running. Loose clothing, tools and other objects can
be caught by rotating parts and cause serious injury.
•
Keep children and other unauthorized persons away from the work area.
•
Do not allow children to play with the tool or its packaging.
•
Be careful when working on hot engines because of the risk of burn injuries.
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Crankshaft Oil Seal Mounting Tool
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 1246
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicité
