KPS FASTCHECK3010 Mode D'emploi page 5

GENERAL DESCRIPTION
FASTCHECK3020 execute the following test:
1. VOLT and Socket Test (Correct wiring of Plug)
2. Voltage measurement L-N , TRMS
3. Residual Current (RCD) type A, AC and F also in AUTO mode with
CONTACT VOLTAGE measurement
4. Z LOOP (Global earth resistance in TT system and impedance L-Pe
in TN with short circuit current )
5. Short circuit current
6. Voltage harmonics up to 49 th
7. THD% (Total harmonics Distortion)
8. Frequency of the fundamental Harmonics and up to 49 th
Function can be selected thorugh the dedicated button .Sub function
features can be selected through the arrow button for example for
selecting the RCD type or evaluate different harmonics. The instruments
is powered from the line and due to the SUPERCAP technology can keep
the power even when disconnected from the line .Fully charged supercap
allow 45 second after switch off from the line.This allow the user to read
the value after the RCD is tripped out(with tripping time) or when is
difficult to read the display value
Outcome are always
according the local regulamentation or
In the SOCKET TEST uncorrect value the instruments generate also a
sound allarm.
GREEN when the measured value is correct in
RED
when the test is not passed.
5