Publicité
CONTROL BUTTONS
A. START/STOP BUTTON
The machine will start running when start/stop
button is pressed and will stop when pressed
the second time.
The machine will rotate slowly at start of
sewing.
• Green light "ON" Ready to sew or bobbin
winding
• Red light "ON" ... Presser foot is not in down
position or buttonhole lever is not lowered
If the red light is on, the machine will not start
even when start/stop button is pressed.
B. SPEED CONTROL BUTTON
The machine will sew faster when the button
is slided to the right, and sew slower when
button is slided to the left.
16
All manuals and user guides at all-guides.com
C. NEEDLE UP/DOWN BUTTON
Needle position can be changed by pressing
this button. Pressing this button will permit
one stitch sewing.
D. REVERSE STITCH BUTTON
The machine will continue to sew in reverse
at low speed while the button is pressed and
stop when the button is released.
E. DROP FEED LEVER
The fabric feed dogs project up through the
needle plate, directly below the presser foot.
Their function is to move the fabric being
sewn. The drop feed lever controls the fabric
feed dogs.
For ordinary sewing, move the lever to the
right. This raises feed dogs to their highest
position. For most sewing, the lever should
be in this position.
For darning of free motion embroidery or
whenever fabric is to be moved by hand,
move the lever to the left to lower the fabric
feed dogs.
A
B
C
D
E
Publicité
