Assa Abloy eCLIQ Instructions D'installation Et De Montage page 23

All manuals and user guides at all-guides.com
I
Impor tant!
Work on the door leaf: For work on the door leaf, such as drilling or
cutting, the eCLIQ electronic locking cylinder and the mortise lock must
be removed.
Protect against the penetration of dirt and chips: The eCLIQ electronic
locking cylinder can be damaged from the penetration of chips or dirt.
Application of force can destroy the locking cylinder: The application
of force, e.g. striking with a hammer, can damage or destroy the locking
cylinder.
Tension-free installation: The eCLIQ electronic locking cylinder must be
installed tension-free according to the installation situation. Therefore,
only screw in the cylinder fixing screw hand-tight.
The eCLIQ electronic locking cylinder must be installed in the appro-
priate size: The eCLIQ electronic locking cylinder is produced in multiple
cylinder lengths („Technical data", page 25). Before installation, make
sure that the eCLIQ electronic locking cylinder is in the size matching the
door leaf thickness. The eCLIQ electronic locking cylinder may not protrude
more than 3 mm beyond the fitting surface.
Installation and adjustments according to DIN EN 15684: All com-
ponents must be installed and adjusted in a manner which ensures
conformity with DIN EN 15684.
EN
Installation 23