Felisatti AS20/1200 Mode D'emploi page 6

English
Product
Type
Read the operating manual carefully before starting to use the vacuum
cleaner. It provides important instructions for the operation, safety, care
and maintenance. Keep the operating manual in a safe place and, in case
you sell the unit, hand it on to the next owner.
The manufacturer reserves the right to carry out modifications to the
design and equipment.
Any other work not covered by this operating manual must not be carried
out.
Electro-technical tests must be carried out in accordance with the
accident prevention regulations (BGV A3) and in accordance with
DIN VDE 0701 Part 1 and Part 3. These tests are required in accordance
with DIN VDE 0702 at regular intervals and after repair or modification.
A dust-technical check must be carried out at least once a year by the
manufacturer or a trained person, e. g. for damage to the filter, dust-
tightness of the vacuum cleaner, function of the monitoring equipment.
The vacuum cleaners are successfully tested in accordance with IEC/
EN 60335–2–2.
1 Safety advice
The vacuum device is designed for industrial
use.
Ideal in combination with an electric tool, on
building sites, in workshops, etc.
1.1 Danger
● Keep packaging material such as plastic
bags away from children.
▶ Never stand or sit upon the vacuum device.
▶ Particular caution is advised when ascending
stairs. Pay attention to standing safely.
▶ Do not pull the suction hose and connection
line over sharp edges, kink it or shut it.
▶ Always lay the suction hose and connection
line so that nobody may trip over them.
▶ In case of any leakage of foam or liquid, im-
mediately switch off the vacuum device.
▶ Always keep dry the inside of the lid.
▶ Do not start the vacuum device including its
accessories if:
● the vacuum device shows detectable
damage (fissures/cracks);
6
All manuals and user guides at all-guides.com
Vacuum cleaner for wet
and dry applications
AS20/1200
Original operatin instructions in German
● the power connection line is defective or
shows fissuring or ageing; or
● any invisible defect is suspected (after a
fall).
▶ Do not operate the vacuum device where
there is danger of explosions.
▶ Keep away the vacuum device from inflam-
mable gases and substances.
▶ Do not aspirate any combustible or explo-
sive solvents, materials soaked in solvents,
explosive dusts, liquids such as petrol, oil,
alcohol, diluents or materials hotter then 60
°C (140 °F).
▷ Otherwise there will be danger of fire and
explosions!
▶ Use the socket of the vacuum device only
for the purposes defined in the instruction
manual.
▶ In case of any inappropriate usage, improper
operation or repair, the producer shall be
exempt from liability.
▶ Do not use any damaged extension lines.
▶ If the connector line of the vacuum device
has been damaged, it must be replaced with
a special connector line which is available
from the producer or their service.
▶ Electric brushes: Do not allow the rotating
brushes to get into contact with the power
connection line.
▶ The voltage on the type sign must corre-
spond to the grid voltage.
▶ After every use and before any maintenance,
switch off the vacuum device and pull the
power plug.
▶ Pull on the plug only, not on the line.
▶ Never plug or pull the power plug with wet
hands.
▶ The socket must be secured via a household
fuse with a suitable current rating.
▶ Never open the vacuum device outdoors in
rain or storm.
▶ Have repairs been made only by experts, e.
g. the producer's service. Use original spare
parts only.
▶ Improperly repaired devices pose a hazard
for the user.