Télécharger Imprimer la page

Global MH-MF40A Mode D'emploi page 9

Publicité

Les langues disponibles

Les langues disponibles

1). Remplir à moitié le bac à eau avec de l'eau et 1/2 tablette d'eau de javel;
Bien mélanger
2). Laissez la solution agir pendant 20 minutes, en essuyant et en mouillant toutes les surfaces de
temps en temps.
3). Videz avec précautions le bac aprés 20 minutes et rincez avec de l'eau chaude jusqu'à
disparition des traces blanches. Séchez avec un chiffon propre ou une serviette en papier.
TROUBLESHOOTING
Note: If you encounter a problem, please contact seller or our
service
agent. Do not attempt to
open the motor housing yourself; This may voidyour warranty, damage to the fan or to cause injury
..
GENERAL SAFETY RULES
1). Do not connect the fan to the power supply until the fan is FULLY assembled.
2). Don't pull the plug with wet hand in order to avoid getting an electric shock.
3). Always position the fan on a stable, level surface, don't use the fan in such place where
the curtain may be drawn in.
4). Do not connect to any power supply other than 220~240V/50Hz.
5). Aways switch off the fan and unplug from the mains socket when not in use.
6). Never operate the fan if it has damaged or worn parts. It should be returned to the
manufacturer, service agent or a similarly qualified person for repair in order to avoid a
hazard.
7). Do not spray anything into the fan.
8). Do not use the fan near flammable areas or substances.
9). To reduce the risk of electric shock, do not remove any screws.
10). Do not insert fingers or other objects through the fan guard.
11). Do not remain in the direct wind path of the fan for long periods of time.
12). This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given

Publicité

loading

Produits Connexes pour Global MH-MF40A