Samsung MX-ST90B Mode D'emploi page 25

1. Put the Sound Tower into "BT PAIRING" mode and connect each mobile device.
2. On your device, select "[AV]MX-ST9B Series" from the list that appears.
3. When the Sound Tower is connected to two mobile devices, The light bar will be fully lit in cyan,
and the Bluetooth light on the rear panel will be solid.
How to operate Bluetooth Multi Connection Function
Play music from one of the connected Bluetooth devices while two devices are connected. If music is
played from the Bluetooth device "B" while playing from device "A", the music starts playing from device
"B" and automatically pauses on device "A".
NOTES
• When connecting to a Samsung TV, the BT multi connection will automatically disconnect
• If you want to connect the Sound Tower to a third device, you can disconnect the Sound Tower from
one of the two currently connected devices and then connect the Sound Tower to the third device.
• With the Sound Tower and two devices currently connected, when pairing to a new Bluetooth
device, the devices currently connected may be disconnected.
• Environmental conditions or other factors with connected devices may have an effect on playback
quality.
• Electronic devices may cause radio interference. Devices that generate electromagnetic waves
must be kept away from the Sound Tower main unit - e.g., microwaves, wireless LAN devices, etc.
• Bluetooth Multi connection may not be supported depending on the connected device's
specifications.
• Removable/detachable Bluetooth devices (Ex: Dongle etc..), windows phone, laptops, TV, etc. do not
support Bluetooth Multi connection.
• After Bluetooth Multi connection pairing, there may be a slight delay before music starts playing
depending on the Bluetooth devices.
• If you move too far out of range from the Sound Tower without first disconnecting your Bluetooth
device, it may take a few minutes to connect other Bluetooth devices. If you turn the Sound Tower
off and back on, you can connect other Bluetooth devices without waiting.
Disconnecting the Sound tower from the Bluetooth device
Press the Source button on the top panel or on the remote control, and then change to any mode
except "BT".
• Disconnecting takes time because the Bluetooth device must receive a response from the Sound
tower.
• When the Soundtower is disconnected from a Bluetooth device, the sound tower will beep.
ENG - 19