All manuals and user guides at all-guides.com
CARE AND CLEANING
• Never clean the appliance with a steam cleaner. Moisture could accumulate in
electrical components, danger of electrical shock!
• Hot vapors can lead to the damage of plastic parts. The appliance must be dry
before it is placed back into service.
• Ethereal oils and organic solvents can attack plastic parts, e.g. lemon juice or the
juice form orange peel, butyric acid, cleanser that contain acetic acid. Do not allow
such substances to come into contact the appliance parts.
• Do not use any abrasive cleaners.
• Clean the appliance and the interior accessories with a cloth and lukewarm water.
After cleaning wipe with fresh water and rub dry.
• After everything is dry place appliance back into service.
TROUBLESHOOTING
Problem
Possible Cause
Appliance does
Mains plug is not plugged in
not work
or is loose
Fuse has blown or is defective
Socket is defective
Appliance cools
Temperature is set too cold.
too much
The food is too
Temperature is not properly
warm.
adjusted.
Door was open for an
extended period.
A large quantity of warm food
was placed in the appliance
within the last 24 hours.
The appliance is near a heat
source.
Suggested Solution
Insert mains plug.
Check fuse, replace if
necessary.
Mains malfunctions are to be
corrected by an electrician.
Turn the temperature to a
warmer setting.
Please look in the initial
Temperature Setting section.
Open the door only as long as
necessary.
Turn the temperature regulation
to a colder setting temporarily.
Please look in the installation
location section.
EN
17