klover BF-01 Installation, Utilisation Et Entretien, Conseils Utiles page 81

All manuals and user guides at all-guides.com
Open the hatch under the pellet side and, after having loosened the hand wheel, extract the plate from the lateral "flue gas pass".
Use a suitable suction device to remove internal deposits and then re- close the pipes, making sure that the plates have been fixed well. Re-position the
underlying front panel.
For correct functioning, it is necessary to use a suction device to remove the sawdust deposit on the base of the pellet tank at least every 15
days. The pellet tank must be emptied at the end of every season.
Extraordinary cleaning (WOOD SIDE)
To be performed at least twice a season.
Carry out routine cleaning;
After the upper outlet on the wood side has been removed, suck any ash deposits inside the flue gas pass.
21