Publicité
Les langues disponibles
Les langues disponibles
Destination of use
The new automatic functioning Bi-Fire thermo stove by KLOVER has been designed for heating your home.
The thermo stove works exclusively with wood pellets and wood and only with the hearth door shut. Never open the door when the appliance is
running.
The thermo stove has a DOUBLE COMBUSTION system that guarantees an extraordinary efficiency average and "clean" flue gas exhaust with an
emission of CO in the atmosphere which is among the lowest in Europe.
Do not use the thermo stove in disagreement with the indications contained in this user guide. The thermo stove is an indoor product.
This user guide is integral part of the thermo stove.
If the product is transferred the user must give this manual to the new purchaser.
KLOVER S.R.L. DECLINES ANY RESPONSIBILITY IN CASE OF ACCIDENTS DUE TO THE FAILURE TO COMPLY WITH THE SPECIFICATIONS OF
THIS MANUAL.
FURTHERMORE KLOVER S.R.L. DECLINES ANY RESPONSIBILITY DUE TO INCORRECT USE OF THE PRODUCT BY THE USER, MODIFICATION
AND/OR UNAUTHORISED REPAIRS, USE OF NON - ORIGINAL SPARE PARTS OR SIMPLY NOT SPECIFIC FOR THIS PRODUCT.
KLOVER S.R.L. IS NOT RESPONSIBLE FOR INSTALLATION OF THE THERMO STOVE. THE INSTALLER IS THE ONLY PERSON RESPONSIBLE
FOR THIS OPERATION AND HE IS ALSO ENTRUSTED WITH CHECKING THE FLUE, THE EXTERNAL AIR VENT AND THE CORRECTNESS OF
THE SOLUTIONS SUGGESTED FOR INSTALLATION. ALL THE SAFETY STANDARDS CONTAINED IN THE SPECIFIC LAW IN FORCE OF THE
STATE WHERE THE THERMO STOVE IS INSTALLED MUST BE RESPECTED.
EXTRAORDINARY MAINTENANCE MUST ONLY BE PERFORMED BY AUTHORISED AND QUALIFIED STAFF
For the validity of the warranty, the user must comply with the provisions contained in this guide and in particular:
-
Use the thermo stove according to its operational limits;
-
All maintenance must be performed constantly;
-
Only authorise expert and competent people to use the thermo stove.
Failure to comply with the requirements of this guide makes the warranty automatically null and void.
Installation Regulations
These operating and instructions cover the basic principles to ensure the correct installation of the pellet stove, although particulars may need modification
to reflect local site conditions. In all cases the installation must comply with current Building Regulations, Local Authority By-laws and other regulations that
affect the installation of the stove.
The Building Regulations requirements can be met by adopting the relevant recommendations given in British Standards BS 8303, BS 6461 and BS 7566
as
an alternative means to achieve an equivalent level of performance to that obtained by following the guidance given in Approved Document J.
Health and Safety
Care must be taken when installing a Klover pellet stove to ensure that the requirements of the Health and Safety at Work Act are met.
Handling
Adequate facilities must be available for loading, unloading and site handling the appliance bearing in mind the weight of the appliance.
THE THERMO STOVE, PELLETS AND WOOD
Thermo stove Components
All manuals and user guides at all-guides.com
WOOD SIDE COMBUSTION
REGULATOR
3
Publicité
