Safety Notes; Product Description And Specifications - Bosch GTA 6000 Notice Originale

OBJ_BUCH-1402-001.book Page 8 Tuesday, February 22, 2011 10:13 AM
8 | English

Safety Notes

en
General Safety Rules
Read all warning notes and instruc-
tions enclosed with the saw stand
and the power tool to be mounted.
Failure to follow the warnings and in-
structions may result in electric
shock, fire and/or serious injury.
Safety Warnings for Saw Stands
Pull the plug from the mains receptacle
and/or remove the battery from the power
tool before making adjustments on the tool
or changing tool accessories. Unintentional
switching on of the power tool is the cause of
many accidents.
Assemble the saw stand in the proper man-
ner before mounting the power tool. Proper
assembly is important to prevent the risk of
a collapse of the saw stand.
Attach the power tool securely to the saw
stand before using it. Slipping off of the
power tool on the saw stand can lead to loss
of control.
Place the saw stand on a firm, level and hor-
izontal surface. If the saw stand can slip off
or wobble, the workpiece cannot be uniform-
ly and securely guided.
Do not overload the saw stand and do not
use it as a ladder or scaffolding. Overload-
ing or standing on the saw stand can lead to
the upward shifting of the centre of gravity of
the stand and its tipping over.
Do not ram the workpiece with force into
the saw blade. When too much force is ap-
plied when using the power tool, the saw
stand can be tipped over.
When working, take care that all bolts and
connecting elements are firmly tightened.
Loose connections can lead to instability and
inexact sawing.
Ensure that long and heavy workpieces do
not affect the equilibrium of the saw stand.
Long and/or heavy workpieces must be sup-
ported at the free end.
1 609 929 Y29 | (22.2.11)
Keep your fingers clear of the hinge points
while pushing the saw stand together or
pulling it apart. Danger of fingers being
crushed or contused.
Symbols
The following symbols can be important for the
operation of your saw stand. Please memorise
the symbols and their meanings. The correct in-
terpretation of the symbols helps you operate
the saw stand better and more secure.
Symbol Meaning
The maximum carrying capacity
(power tool + workpiece) of the
saw stand is 100 kg.
Product Description and
Specifications
Intended Use
The saw stand is intended to accommodate the
following stationary saws from Bosch:
– GTS 10 XC Professional
Together with the power tool, the saw stand is
intended for the cutting to length of boards and
profiles.
Product Features
The numbering of the product features refers to
the illustration of the saw stand on the graphics
pages.
1 Release lever
2 Base frame
3 Saw stand leg
4 Fastening kit
5 Fastening kit, power tool
Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
3 601 L30 4..
Bosch Power Tools