Publicité
Les langues disponibles
Les langues disponibles
Figure 2
Figure 3
Figure 4
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
PAGE 2 OF 4
assEMBlY CONTINUED
3. Align the other double holed bench slat on the top
two pre-drilled holes of the bench base backrest.
Loosely attach bench slat to the bench bases with
the 3½" lag screws and washers. (See Figure 2)
4. Align three single hole bench slats on the pre-drilled
holes of the bench base seat. Loosely attach the
single hole bench slats with the 3½" lag screws and
washers. (See Figure 3)
5. Align the remaining two single hole bench slats on
the pre-drilled holes of the bench base backrest.
Loosely attach the single hole bench slats with the
3½" lag screws and washers. (See Figure 4)
6. Make sure the bench is square and tighten all lag
screws.
1-800-295-5510
uline.com
NOTE: H-2565 Mounting hardware sold
separately.
0814 IH-2888
Publicité
